What information does a departure procedure contain?

Expect Departure Clearance Time: The Expect Departure Clearance Time (EDCT) is the expected runway release time assigned to an aircraft included in traffic management programs. Pilots may hear clearance delivery/ground control state: “[Callsign] you have an EDCT time of 1356, acknowledge”

What services will an ATC tower provide?

Air Traffic Control Tower Services:

• ATCT control runway traffic, issuing takeoff and landing clearances.
• Provides airport advisory information to arriving flights in the absence of ATIS.

What does a departure controller do?

Approach and departure controllers ensure that aircraft traveling within an airports airspace maintain minimum separation for safety. They give clearances to enter controlled airspace and hand off control of aircraft to en route controllers.

How does an approach controller receive information about aircraft?

The aerodrome controller may also be known as the airfield controller or the local controller. Since most of these aircraft are out of sight of the airfield, the approach controller does not need a window to the world outside. Instead, obtains information from RT, landline communications, and radar displays.

What are boarding procedures?

Definition: Airline procedures that process passengers and allow them onto the correct aircraft for their destination. Significance: Boarding procedures ensure that only ticketed passengers board the correct aircraft for their destination.

What is boarding process at airport?

Check-in at the Airport Officials at the counter will check the required documents to verify your identity. After verification, you will be issued a boarding pass which will have all the details of your travel like Flight number, seat number, scheduled departure time of the flight.

What do pilots say to the control tower when landing?

Phrases tower controllers say: “Cleared to cross runway two seven” (taxi across runway 27) “Cleared for the visual, runway one seven” (look out the window, find runway 17, and fly to it) “Cleared to land, runway two seven Right” (The pilot has permission to land on Runway 27 Right)

What is the role of a tower controller in aviation?

When necessary, the tower controller will issue clearances or other information for aircraft to generally follow the desired flight path (traffic patterns) when flying in Class B, Class C, and Class D surface areas and the proper taxi routes when operating on the ground.

Do pilots have to be in contact with the control tower?

Airports with an Operating Control Tower When operating at an airport where traffic control is being exercised by a control tower, pilots are required to maintain two-way radio contact with the tower while operating within the Class B, Class C, and Class D surface area unless the tower authorizes otherwise.

Does the instrument tower have the runway in use information?

Towers and centers do not have nontower airport traffic and runway in use information. The instrument approach may not be aligned with the runway in use; therefore, if the information has not already been obtained, pilots should make an expeditious change to the airport advisory frequency when authorized.

How to communicate at an airport without an operating control tower?

The key to communicating at an airport without an operating control tower is selection of the correct common frequency. The acronym CTAF which stands for Common Traffic Advisory Frequency, is synonymous with this program.