How much water will a cylindrical tank contain if its height is 10 m and diameter is 14m?

The answer is 15,40,000 litre.

What is the pressure at the bottom of a cylinder with a radius of 0.5 m and height of 3 m filled with water?

Where, r1 = external radius and r2 = internal radius of a cylinder. The difference of the external and internal radius forms the wall thickness of a cylinder i.e. Let’s solve a few example problems about the volume of cylinders. The diameter and height of a cylinder are 28 cm and 10 cm, respectively.

How fast does the water level drop when a cylindrical tank is drained at a rate of 3 liters SEC?

about 0.00096 m/s.
How fast does the water level in the tank drop when the water is being drained at 3 litres per second? Thus, the water level in the tank is decreasing at a rate of about 0.00096 m/s.

What is the depth of a water tank?

Water depth means the depth as measured from the water level to the bottom of a public swimming pool. Water depth means the depth of the water between the surface and the seafloor as measured at mean lower low water.

What is the formula for calculating depth?

Add together the depths. In the above example, 5+9+3+7+11 = 35. Divide the sum of the depths by the number of items you measured. In the example, 35 divided by 5 equals an average depth of 7 inches.

How do you calculate pressure at depth of water?

Thus the equation P = hρg represents the pressure due to the weight of any fluid of average density ρ at any depth h below its surface. For liquids, which are nearly incompressible, this equation holds to great depths.

How do you find pressure at the bottom of a tank?

In the case of the water stored in a tank, the pressure at its bottom is the weight acting on a unit area of the surface where the tank is kept. To translate that into an equation: Pressure = weight/area, and weight = mass (m) * acceleration due to gravity (g). This means pressure = m * g/ area.

How fast is the height of water decreasing?

0.1386 ft/hr.
So, it looks like the height is decreasing at a rate of 0.1386 ft/hr. to get the volume in terms of V V and r r and then proceed as before.

How do you find the depth of water?

The most reliable method of obtaining the depth to the water table at any given time is to measure the water level in a shallow well with a tape. If no wells are available, surface geophysical methods can sometimes be used, depending on surface accessibility for placing electric or acoustic probes.

What is mean depth of water?

[′mēn ′depth] (hydrology) Average water depth in a stream channel or conduit computed by dividing the cross-sectional area by the surface width.