What is difference between AT89S52 and 8051?

The basic difference between these two controllers is in their RAM memory and flash memory. 8051 is the basic microcontroller. AT89S52 is of 8051 type.

What is difference between ATmega16 and ATmega32?

ATmega32 is very much similar to ATmega16 microcontroller with certain differences which are discussed below. ATmega32 is an 8-bit high performance microcontroller of Atmel’s Mega AVR family. Atmega32 is based on RISC (Reduced Instruction Set Computing) architecture with 131 powerful instructions.

What is the difference between ATmega328P and ATmega16?

ATMega16 is one of the cheapest and most used microcontrollers due to its multiple pins and feature. It is closest to the ATmega328P but it is smaller in memory size and larger in pins. ATMEL designed ATMega16 by using RSIC CPU and 8-bit CMOS technology which helps it to operate with other TTL/CMOS devices by consuming less power.

What is AVR ATMega16 microcontroller?

The microcontroller comes in tow packaging and their pins vary at different packages. The AVR ATmega16 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture.

What is the difference between Arduino and Intel 8051?

In a nutshell, Arduino itself isn’t a microcontroller but a microcontroller board with its own IDE and which comes with pre-tested software and hardware libraries. The Intel 8051 microcontroller actually refers to the whole family of 8-bit microcontrollers with numbers ranging from 8031 to 8751.

What is the memory of 8051 microcontroller?

In microcontroller 8051 there is code or program memory of 4 KB that is it has 4 KB ROM and it also comprise of data memory (RAM) of 128 bytes. Bus : Bus is a group of wires which uses as a communication canal or acts as means of data transfer. The different bus configuration includes 8, 16 or more cables.