Can I replace just the tub faucet?

If your bathtub faucet is old or broken, you can easily replace it with a new one all by yourself. The process is the same whether you have a single handle faucet or one with multiple controls. If you want to change your faucet handles, you need to remove them along with the stems connecting to the pipes.

How do you replace a bathtub faucet without the access panel?

How to Replace Tub Faucets With No Wall Access

1. Turn off the water valves at the main incoming water pipe.
2. Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench.
3. Pry out the clip around the cartridge with a pair of needle-nose pliers.
4. Install a new cartridge inside the faucet head.

How do you replace a shower faucet without the access panel?

If you don’t have an access panel, you might be able to replace the faucet by cutting a hole in the shower surround (Problem 3 below), but the best solution is to install a paintable plastic panel behind the faucet.

How much does it cost to replace a bathtub faucet?

The national average materials cost to replace a bathtub faucet is $236.84 per faucet, with a range between $148.41 to $325.27. The total price for labor and materials per faucet is $719.15, coming in between $576.79 to $861.52.

Is it hard to change a bathtub faucet?

Replacing a leaky or outdated faucet isn’t as difficult as you might think. You can tackle the project with a basin wrench and a few other common tools. It should usually take no more than about an hour. The same steps apply if you’re installing a new faucet onto a new sink.

How hard is it to change shower fixtures?

Learning how to replace a shower faucet can be done in just a few hours, but if you prefer a professional handle the project, consider using our faucet replacement services to get the job done.

How do you remove an old shower faucet?

Insert a Phillips screwdriver into the screw inside the faucet handle. Hold the handle securely with one hand, and rotate the screw counterclockwise to remove the screw and loosen the handle. Pull the handle off of the faucet mount. Remove the other faucet handles in the same fashion.

How do you repair a bathtub faucet?

Insert the bonnet and tighten it with your bath socket wrench or vice grip. Replace the collar, faucet trim, faucet handle, faucet screw and faucet insert. Repeat on the other side to replace parts in the opposite handle. Turn the water back on and test your repair job.

How do you change a bathtub faucet?

To change a bathtub faucet, start by turning off the water supply to the faucet and opening the faucet to drain any leftover water inside of it. Then, unscrew the faucet handles and remove them to expose the faucet stem underneath.

How to replace a bathtub faucet?

– Remove the new faucet from the packaging. – Place the rubber or plastic gasket (or gaskets, as provided) so it will fit between the faucet and the top of the sink holes. – Put the new faucet in position, placing the appropriate valves into their matching holes. – Seal the edge with a thin layer of bathroom caulk . – Put a washer over mounting nuts. First attach them by hand, then tighten securely with a wrench or pair of pliers. – Attach the lift rod to the drain tailpiece. – Connect the hot and cold water supply lines.

How to fix a leaky shower faucet?

Turn off the water supply