Why is it called a wye strainer?

Why is it called a wye strainer?

Wye “Y” Strainers The most common type of strainer in most piping systems is the “Wye” Strainer. The name is derived from the fact that the shape of the strainer resembles a “Y”. Also the Wye strainer has a “blow down” feature so it is not necessary to remove the mesh each time the strainer is cleaned.

Where do I put the Y strainer?

To provide for easier maintenance, the Y-Strainer should be located where the drain plug can be removed. Additionally, ensure the drain or blow-off is located at the lowest position when installed. If installed in the vertical position, the wye side of the strainer must be pointing downward.

How does a Y filter work?

As its name implies, a Y strainer is shaped like a “Y and is used to filter, or strain, out particulates from steam, gas or liquid. This mechanical straining process is made possible via a filter element comprised of mesh, perforated metal, or a wedge wire straining element.

READ:   How do I stop my dog from destroying his bed?

Is a wye strainer a check valve?

A check valve (non-return valve) is used to control the direction of flow of water. They prevent the unwanted backflow of water through pipes in pumping applications. Y strainers provides the mechanical removal of particles and debris for from liquid, gas or steam lines by means of a mesh or wire.

What do colanders do?

Well, now you will. A colander is a kitchen utensil that is primarily used to rinse vegetables or strain foods such as pasta. The bottom is perforated, which allows for water or liquid to drain through while holding on to the solids inside.

Can a wye strainer be installed on its side?

Y strainers are a valuable addition to many piping systems as they can be installed vertically or horizontally. Add that to the fact that they can be used to transport steam, gas, or liquid, they are an excellent choice for a strainer.

Do Y strainers work vertically?

While it is most common to see Y strainers installed horizontally, they can be installed vertically as well. If you are looking to install your Y-strainer vertically, it’s critical to note that vertical Y strainers must be used with pipes that have a downward flow, allowing debris to flow naturally into the pocket.

READ:   What social group was the most important to Indian society?

How do you select the Y strainer?

How to Select a Pipeline Strainer

  1. Choose the proper strainer configuration.
  2. Identify critical design criteria. Select the materials of construction. Determine the correct particle retention size. Choose a strainer size based upon fluid velocity and differential pressure.
  3. Identify installation space constraints.

Can you install a wye strainer vertically?

While it is most common to see Y strainers installed horizontally, they can be installed vertically as well.

Is colander same as strainer?

A strainer is really a catchall name for any type of, well, strainer. It is usually fine mesh and bowl-shaped, good for rinsing a pint of berries or draining pasta. A colander is typically a larger bowl-shaped strainer, often with bigger holes (although that’s not always the case). Strainer.

What is the use of strainer in cooking?

In cooking, a sifter is used to separate and break up clumps in dry ingredients such as flour, as well as to aerate and combine them. A strainer (see Colander), meanwhile, is a form of sieve used to separate suspended solids from a liquid by filtration.

READ:   How did Rome become Hellenistic?

How does a Y strainer work?

As a refresher, y-strainers are pipe fittings which remove particulates from liquids or gas via a filtering element intersecting the main channel. You can see a picture of a y-strainer above (to the right). Notice that the filter leg connects to the main pipe at a diagonal angle, giving the strainer its “y” shape, and hence its name.

Is a strainer the same as a sieve?

A strainer is a type of sieve typically used to separate a solid from a liquid. The word “sift” derives from sieve. A colander is a bowl-shaped kitchen utensil with holes in it used for draining food such as pasta.

How do Y strainers work?

Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

What is the purpose of using strainer?

A strainer is used to protect other downstream equipment (e.g., pumps, instrumentation) from damage by rogue junk. A filter is employed to separate particles from the fluid. a technical knowledge base for all the process piping professionals around the world…