How do you print on left side of paper?

Sometimes you may wish to print just on one side of paper:

1. Go to File and Print in your application.
2. Select the print queue you wish to use ( Colour or BlackAndWhite )
3. Click Properties or Printer Properties.
4. On the right hand side there is a drop down menu 2 sided.
5. Select Off to print on only one side of the paper.

How do you print the first page of a paper?

Windows

1. Click the [Special Modes] tab.
2. Select [Different Paper] and click the [Settings] button.
3. Select the paper insertion settings. Set the paper source, insert position, and the printing method.
4. Click the [OK] button.

How do I print pages in order?

Getting copies to print in the correct order

1. Press the menu button in the top-right corner of the window and press the Print button.
2. In the General tab of the Print window under Copies, check Reverse. The last page will be printed first, and so on.

What are the steps in printing your publication?

Print your publication

1. Click File > Print.
2. In the Print section, set the number of copies to print in Copies of print job.
3. In the Printer section, make sure that the correct printer is selected.
4. In the Settings section:
5. Click the Print button to send the publication to your printer.

How do you print on used paper?

Since paper is usually printable on both sides, you merely have to take it, flip it over, and place it back into the printer’s paper tray for reuse. You need to take a few precautions to minimize paper jams and other printing failures, though.

Which way do you put paper in a printer?

Load paper short edge first and printable side up. Load letterhead or pre-printed paper top edge first. Do not load paper above the arrow mark inside the edge guide. If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time.

How do I print the first page of a different tray?

For Windows PCL Printer Driver

1. Open the file to print.
2. Select [Print] from the [File] menu.
3. Click [Preferences].
4. Click [Paper Feed Options] on the [Setup] tab.
5. Select the [Use different source for first page] check box.
6. Select a paper tray from [Source], and then click [OK].

How do I select a paper to print?

Change the Paper Type in the Print Driver

1. Open the file to be printed.
2. Click on File > Print.
3. Click on Printing Preferences or Properties to access the Xerox print driver settings.
4. Click on the Printing Options tab.
5. Click on the Paper pull-down menu, select Other Type, and then select the correct paper type.

How do you print collated pages?

To control collating, follow these steps:

1. Choose Print from the File menu. Word displays the Print dialog box.
2. Specify the number of copies you wish to print.
3. Click on the Collate Copies check box. If the check box is selected, this indicates the copies will be collated.
4. Click on OK. Your document will be printed.

How do I print back to back?

Set up a printer to print to both sides of a sheet of paper

1. Click the File tab.
2. Click Print.
3. Under Settings, click Print One Sided, and then click Manually Print on Both Sides. When you print, Word will prompt you to turn over the stack to feed the pages into the printer again.

What is a print publication?

1. The act or process of publishing matter in print or electronic form. 2. An issue of printed or electronic matter, such as a book or magazine, offered for distribution or sale.

How do I print a magazine in Publisher?

Print the booklet or newsletter Note: If your printer supports two-sided printing (or duplex printing), make sure that Two-sided or Two-sided, flip short side is selected under 2-sided printing options. Select any other options that you want, and then click OK to print the publication.