How do I set the date and day on my analog watch?

Here’s how to do it:

1. If you have a screw down crown, loosen it off.
2. If the watch needs to be wound, wind it up.
3. Pull the crown out 2 clicks.
4. Turn the hands until the date changes.
5. Push the crown in one click.
6. Turn the crown either clockwise or counterclockwise until the date is correct.

How do you set the date on an analog watch?

How To Set The Date On An Analog Watch

1. First, make sure the time is not between 9 and 1.
2. Pull the crown out until you feel a click.
3. Turn the crown anti-clockwise to yesterday’s date.
4. Pull the crown out until you feel another click.
5. Move the time forward until the date rolls over to the correct date.

Why is the date on my watch always wrong?

Wrong date change! The reason is quite simple, the watch gears (dials, cogs) work on a 24 hour cycle (actual hours in a day), versus just 12 hours (1-12). When your watch switches at noon instead of at Midnight, that means that your watch cycle is set 12 hours too fast.

How do I set the date on my Fastrack analog watch?

The day and date display window on this watch is located at the dial’s 3 o’clock position. The time, day or date on this watch can easily be adjusted as you wish by using the watch’s rotating screw crown found at on the right side of the dial.

How do you change the date on a digital watch?

To set the time and date on your digital watch, press the “Mode” button repeatedly to access the “Time and Date” display. Press the button multiple times until the “Time” digits begin to flash, noting that on some models you need to hold the button down to access this feature.

How do I set the day on my Timex analog watch?

Pull the crown on the side of the watch case all the way out. This will be position “C,” with position “A” having the crown pushed all the way in and position “B” being pulled out halfway. Turn the crown clockwise until the correct day appears on the small face displaying the day.

How do you change the date on a Titan analog watch?

Most watches have two spots on the chrown, pull out the crown all of the way out to set the time then push the crown in untill you feel another setting and change the date by turning clock wise to the the correct date. Turn the watch couner clock wise untill You get the day of the week.

When should you not adjust the date on a watch?

You should not make adjustments – such as setting the date or day of the week – when the time on the watch reads between the hours of 9:00 pm and 3:00 am. Each movement has its own guidelines so this may vary a little, but avoiding setting anything a few hours either side of midnight should keep you out of trouble.

When should you not change the date on a watch?

Don’t change the date on your watch between 9:00 PM and 3:00 AM. You could damage the movement of the watch. If you want to be sure, change the date around 5:00 (AM or PM).