How do tanks rotate turret?

In the conventional design, a spur gear in the hull (called the traverse gear) engages an internal gear lining the inside of the turret. Turning the traverse gear rotates the turret on the hull, allowing the tank crew to aim the main gun without turning the entire tank. The crew can also pivot the main gun up and down.

Why do tanks travel with their turrets backwards?

In war zone a tank with its turret pointed backwards makes for the easiest way to recognize friendly tanks particularly to aircraft and recon elements. As a tank behind your line with the turret backwards is more likely “friendly” as such a tank is less of a threat.

Can tank turrets rotate?

In modern tanks, the turret is armoured for crew protection and rotates a full 360 degrees carrying a single large-calibre tank gun, typically in the range of 105 mm to 125 mm calibre. Machine guns may be mounted inside the turret, which on modern tanks is often on a “coaxial” mount, parallel with the larger main gun.

How much does it cost to research an auto turret?

The safest way to get your hands on an auto turret is to purchase one from the outpost vending machine for 400 scrap. If you’ve made your way to the outpost to buy a turret, it’s worth your while to bring the extra 500 scrap to research it on-site.

How do German tanks rotate their turrets?

All German tanks from WW II used this mechanism exept Maus, for exmaple Tiger I had manual turret rotation system, max turret rotation was from 3,5° per second to 6°per second, here we have Tiger I It’s either an electric motor or hydraulic pump.

Do all tanks have a turret?

Most tanks have turrets. Some vehicles, most notably certain TDs and SPGs, are “turretless” and do not have turrets at all. In turretless vehicles the gun is mounted directly onto the superstructure of the hull.

What is the difference between conventional and oscillating turrets?

Consequently, Oscillating Turrets can be much smaller (ie lighter) than Conventional Turrets. Gun traverse is achieved by the lower turret part rotating on its ring mount against the hull. Gun recoil is absorbed by oleo-pneumatic rams mounted between the upper and lower turret halves rather than coaxial with the breech.

What is a turret ring and how does it work?

Basically, it’s a turret ring that the turret rests on, and it’s moved by electric or hydraulic motors. Some of the early Japanese models were moved by manual handcrank, but that wasn’t fast enough. In WWII, the Sherman could move 360 degrees in about 15 seconds, the Panther was 18 seconds, and the T-34 was the champ at 12 seconds.