How do you describe a site plan?

Such a plan of a site is a “graphic representation of the arrangement of buildings, parking, drives, landscaping and any other structure that is part of a development project”. A site plan is a “set of construction drawings that a builder or contractor uses to make improvements to a property.

What do site plans tell us?

The block or site plan shows the development site in some detail, including the precise position of the building, access roads, car parking, drainage runs and any special features of the site such as trees and shrubs or perhaps an overhead electricity line.

What makes a good site plan?

Site plans should include parking diagrams equipped with dimensions, number of parking spaces, the flow of traffic, and signage. How traffic flows through and around your site is important to know. It will show the impact your building will have on traffic around the site.

How are site plans measured?

To create an accurate floor plan, start by measuring a room:

1. Measure along the baseboard the length of one wall, from one corner of the room to another.
2. Measure the remaining walls the same way you measured the first.
3. Measure the room’s doorways and other entries.
4. Determine the size of the windows.

What scale is a site plan?

The site plan (also known as a block plan) should be drawn at an identified standard metric scale (typically 1:100, 1:200 or 1:500). It should show the proposed development in relation to the site boundaries and other existing buildings on the site, with dimensions specified including those to the boundaries.

What do site plans look like?

A site plan “usually shows a building footprint, travel-ways, parking, drainage facilities, sanitary sewer lines, water lines, trails, lighting, and landscaping and garden elements. Floor plans may also include details of fixtures like sinks, water heaters, furnaces, etc.

How do I make a site plan?

Prepare a Site Plan

1. Step 1: Determine when a site plan is required.
2. Step 2: Determine property boundaries and lot dimensions.
3. Step 3: Determine the location of structures and other features.
4. Step 4: Draw the plan.
5. Step 5: Check the drawing and make copies.

How much do site plans cost?

Local engineering companies charge the most for site plans, typically created at a cost of $600-$1,200. When the perc test results and drain field report and/or design have already been developed, they can be used to create the site plan.

What is a site plan scale?

A site plan is a large scale drawing that shows the full extent of the site for an existing or proposed development. Typically, depending on the size of the project, site plans are likely to be at a scale of 1 : 500 or 1 : 200.

What should be shown on a site plan?

Site plans should include the following:

• The size and position of the existing building (and any extensions proposed) in relation to the property boundary.
• The position and use of any other buildings within the property boundary.
• The position and width of any adjacent streets.

What kind of engineer does site plans?

Site plans are often prepared by a design consultant who must be either a licensed engineer, architect, landscape architect or land surveyor”. Site plans includes site analysis, building elements, and planning of various types including transportation and urban.

What should be included in a site plan?

Here are the 11 things a good site plan must include: Directions, notes, and abbreviations, as well as project data and a vicinity map. Property lines: Property lines are called out around the exterior of the lot. Setbacks: These are the spaces between a building and its property line.

What is the difference between a plan view and a site plan?

Plan details are drawn in a plan view at a large scale to show the construction. A site plan may or may not be drawn cutting through the building. A site plan is going to show more than just the building, including the entire site the building is located on.

What is a site plan in civil engineering?

A site plan is a document that precisely maps out the area of the building site to scale. Generally speaking there are two site plans provided: Existing site plan – the ‘before’ shot. This site plan shows the site in its current state. Proposed site plan – the ‘after’ shot.

What is a proposed site plan for a house?

A proposed site plan is one that shows a future addition that is being planned for the property. If you have an idea for building something new, then you’ll have to become familiar with both types. Read on to find some tips on how to understand the elements that make up your site plan.