How do you troubleshoot an Onkyo receiver?

Reset the Onkyo if you continue to have trouble. Hold the “VCR/DVD” button while pressing the “On/Standby” button, and the receiver should enter “Standby.” Turn it on again by pressing the “On/Standby” button.

How do I test my Onkyo receiver speakers?

To setup your receiver to output the test tone from the speakers, press the Setup button and select Speakers>Manual Setup>Level>Test Tone Star. You can now select and adjust the speakers’ audio level using the “UP, DWN and SIDES arrows” buttons on your remote control.

What does PCM mean on Onkyo receiver?

Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. The PCM audio recorded on DVD is a two-channel digital, stereo audio track.

How do I reset my Onkyo TX nr636 receiver?

Press and hold down 2HOME until the 3 remote indicator lights (about 3 seconds). Within 30 seconds, press 1RCV again.

How do I reset my Onkyo TX nr616?

I decided to do a factory reset by turning it on, then press the CBL/SAT button while pressing the power button.

How do you fix Onkyo no sound?

Unplug headphones from the receiver when you are trying to use your system with the external speakers. Press the “Muting” button on the remote control to unmute your Onkyo receiver. Check the inputs and outputs to ensure they are correctly connected to the receiver. Adjust the volume controls so you can hear sound.

Why is there no sound coming from my receiver?

Make sure the input devices are playing audio. Make sure the VOLUME or MASTER VOLUME knob of your AV Receiver is not set to VOL MIN. Make sure headphones aren’t connected to your receiver or input device. Press the SPEAKERS button on your receiver and select a setting other than OFF SPEAKERS.

What is direct mode on Onkyo?

Direct: shuts down some processing in the unit for a cleaner audio signal. The sound is reproduced using the same number of channels as in the source material. Full Mono: all speakers output the same sound in mono.

What is TV Logic sound Onkyo?

TV Logic. Suitable for TV shows produced in a TV studio. This mode enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image.

What is pass through audio?

5.1 audio passthrough allows you to connect a source device to a TV and have the TV pass the source’s surround sound signal through to a receiver or soundbar. It can help cut down on the number of cables necessary for a surround sound setup, and without much impact on sound quality.

What should I do if my Onkyo receiver loses audio/network connection?

• Please peel the Serial Number Label off the back of the product you have and send it back to ONKYO as noted on the Trade-in form. Importantly, please note that the loss of audio/network connection issue will not result in harm to any connected components or speakers since the issue is contained to a single element within the affected receivers.

How do I fix a broken Onkyo chip?

Contact onkyo http://www.onkyousa.com/Support/ and they should help you by fixing the broken part. Normally if its a onboard chip as i’m assuming it is, they are almost impossible to fix without expensive tools. Contact them and see what they can do, if they cant do anything, let me know and ill give you another option.

What should I do if my Onkyo air conditioner is not working?

AC Fuse—The AC fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild deter- gent and water. Dry the unit immediately afterwards with a clean cloth.