Table of Contents
How thick is T-72 armor?
The glacis of the new laminated armour is 205 mm (8.1 in) thick, comprising 80 mm (3.1 in) HHS, 105 mm (4.1 in) double layer of laminate and 20 mm (0.79 in) RHA steel, which when inclined gives about 500–600 mm (20–24 in) thickness along the line of sight.
What can destroy a T-72?
The third T-72, at a range of roughly 400 yards, fired a round, which left a groove in the armor of the Abrams. It, too, was destroyed by a shot fired through a sand berm. These were, supposedly, Russia’s state-of-the-art tanks.
How many t55 does Russia have?
T-54/T-55
| T-54/55 | |
|---|---|
| Produced | 1946–1981 (Soviet Union) 1956–1979 (Poland) 1957–1983 (Czechoslovakia) |
| No. built | 86,000–100,000+ est. |
| Variants | See Operators and variants section below |
| Specifications (T-55) |
Is the T-55 an MBT?
The T-54 and T-55 tanks are a series of main battle tanks (according to some sources) although not recognized as MBT by Soviet and Russian sources, instead classifying them as medium tanks (the very concept of “main battle tanks” was applied only to tanks beginning with T-64A, armed with 125-mm tank gun) that were …
How many tanks does Russia own?
Military > Army > Main battle tanks: Countries Compared
| # | COUNTRY | AMOUNT |
|---|---|---|
| 1 | Russia | 22,710 |
| 2 | China | 9,000 |
| 3 | United States | 8,725 |
| 4 | India | 5,978 |
How thick is the armor on a tank turret?
So the whole array would be: 50 mm anti-radiation liner – 40 mm thick roof armor – 80 mm polyurethane – 2 mm steel – 7 mm explosive – 2 mm steel – 10 mm high hardness steel or 191 mm of armor of which 90 mm are part of the turret roof and 101 mm applique armor.
What is the most space efficient armor?
“ERA is highly efficient per thickness – afaik it is the most space efficient armor. The reactive elements in the Soviet Kontakt-1 ERA consisted of a 7 mm thick layer of explosive sandwiched between two 2 mm thick steel plates (so the total thickness is 11 mm) which can reduce the penetration of a missile warhead by 400 mm.
What is the difference between (4) and (6) armor plates?
(4) is a 80 mm thick polyurethane layer and (6) marks a 10 mm thick armor plate of high hardness steel under which a Kontakt-1 reactive element is located.
How thick is the glacis armor?
Glacis is 235mm thick with probably 105mm STEF and 30mm hard steel. The TE of STEF is 0.41 KE and 0.55 HEAT and the TE of hard steel is 1.34 vs KE & 1.3 vs HEAT. Thus the glacis should offer [3 x 1.34 + 10.5 x 0.41 + 11] / 0.38 =~51cm KE and [3 x 1.3 + 10.5 x 0.55 + 11] / 0.38= ~ 54cm HEAT armor.