What are the steps of instrument processing?

The instrument processing work flow must follow the CDC guidelines, with the following sequential steps: disposal of sharps; transportation; disposal of single-use disposable instruments and waste; sorting of instruments and handpieces; cleaning; sterilization and storage.

What is instrument processing?

A systematic approach is methodical, repeatable, and learnable through a step-by-step process. Instrument processing is most successful when a set of appropriate steps and activities is identified, organized in the correct sequence, put into place, and then followed consistently each time the process is repeated.

What is the first step in the processing of used instruments?

After the safe transport of instruments from the clinical area, removal of any residual debris, including blood, bloody fluids, and tissue is the first step in instrument processing. Cleaning can occur by using a mechanical means such as an ultrasonic or washer with an added detergent, or by hand.

What is the most important step in instrument processing?

There are typically six steps in the instrument processing cycle. The first – and most important – step is cleaning. Studies have demonstrated that a soiled instrument cannot be sterilized successfully.

What is the correct sequence of the instrument processing steps quizlet?

What are the seven steps to instrument processing? Transport, cleaning, packaging, sterilization, storage, delivery, and quality assurance program.

What are the steps of sterilization?

Every sterilization process consists out of three phases. Phase I the conditioning phase, phase II the actual sterilization phase and phase III: bringing the sterilizer in a safe state to open.

What are the stages of sterilization?

The Autoclave sterilization process has four stages Pre-Vacuum, Rising Temperature, Sterilizing and Vacuum-Drying, which are classified employing the one vs all algorithm.

What is instrument processing area?

The instrument processing area should be physically divided into sections for 1) receiving, cleaning, and decontamination; 2) preparation and packaging; 3) sterilization; and 4) storage. The packaging area is for inspecting, assembling, and packaging clean instruments in preparation for final processing.

What is high-level disinfection?

High-level disinfection traditionally is defined as complete elimination of all microorganisms in or on an instrument, except for small numbers of bacterial spores.

What is the workflow pattern for instrument processing?

regardless of the size or shape of the instrument processing area, four basic areas govern the workflow pattern. Processing instruments should proceed in a single loop(from dirty, to clean, to sterile, to storage, without ever “doubling back”.

What are the three areas of an instrument processing area?

The instrument processing area should be physically divided into sections for 1) receiving, cleaning, and decontamination; 2) preparation and packaging; 3) sterilization; and 4) storage.