What do I connect the remote turn on wire to?

Some of the more common options for connecting the remote turn on wire when using a factory head unit are to the wire connected to a power antenna (older vehicles which do not turn off the antenna when not using the radio) or to the vehicle’s fuse box.

What does the accessory wire connect to?

The 12V accessory wire is connected from the stereo to the ignition switch accessory wires. So when you turn on the ignition, it activates the 12V accessory wire to turn on the stereo. This means that the 12V wire must stay connected to power the stereo.

Where do I connect the remote wire for my amp?

The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).

Is the power antenna wire the remote wire?

Almost every aftermarket head unit has a remote turn on wire. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on. It should be noted that some head units have both a remote turn on wire and a power antenna wire.

What is SWC connector?

What is a SWC interface? SWC is an acronym standing for Steering Wheel Control. An SWC interface is a module that connects a vehicle’s OEM steering wheel controls with an aftermarket headunit or radio replacement unit.

What color is the accessory wire?

red
Check for the Dimmer and Accessory Wires It’s typically orange or orange with a white stripe. The wire that still shows 12V is the accessory wire, which is usually red in aftermarket wiring harnesses. If only one wire ever had power in this step, it is the accessory wire.

What gauge is remote turn on wire?

Remote Turn-On Wire: Gauge: 18 AWG. Wire Construction: Oxygen Free Copper (16 strands)

Can I use speaker wire for remote turn on?

Speaker wires can be used as remote wires. It doesn’t matter what kind of wire you use for a remote wire. Any copper wire will work when used as a remote wire. Since most speaker wires are made of copper metal, they can be used for remote wiring.

What are the key 1 and key 2 wires?

These radios’ SWC wires are often identified as KEY 1 and KEY 2, or SW 1 and SW 2. This enables you to connect your Panasonic, Android radio, or another radio brand to our PAC interface to retain steering wheel controls with the radio without having to modify our 3.5mm connector.

How do I wire a remote wire to an amp?

the remote wire is for powering on the amp. if you supply it with any 12v+ the amp should work. If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp.

How does the remote turn on wire work on a car?

The remote turn on wire receives voltage from the factory electrical system when the ignition is in the ACCESSORY or ON position (keep reading this document for the complete explanation). This voltage is transferred through the remote turn on wire to the amplifier turn on circuit; when the amplifier senses this voltage, it turns the amplifier on.

How to wire a remote start wire?

The remote wire requires a 12 volt power source that comes on with the car. The easiest thing to do is to wire it into the fuse box…coordinate with the diagram to find a fuse that comes on when you start the car or turn the key to accessory, such as turn signals, windshield wipers, etc….

Do I need a remote wire for my car stereo?

Yes a remote wire is necessary. You must wire the remote wire from the amp to and ignition source of power (a component which turns on when the ignition in the car is engaged.) i.e. the radio. The remote wire signals for the amp to power on. Where does the battery wire for your car stereo go? Any hot wire.