What do pilots announce when landing?

To indicate the landing clearance or final approach, the Captain will either make the following announcement and/or blink the No Smoking sign. “Flight attendants, prepare for landing please.” “Cabin crew, please take your seats for landing.” It may be followed by an announcement by a flight attendant.

Which one gets a priority at the airport runway a landing aircraft or a departing aircraft and why?

An aircraft landing or in the final stages of an approach to land shall normally have priority over an aircraft intending to depart from the same or an intersecting runway.

What are the responsibilities of air traffic controller?

Air traffic controllers are responsible for directing the safe movement of aircraft arriving and departing from airports and along major air routes. Rewards come in the form of good earning potential and the ability to progress to a position of high responsibility.

What are common announcements at the airport?

Listen to some typical public announcements made in an airport or airplane.

• Pre-boarding Announcement. Good afternoon passengers.
• Final Boarding Announcement.
• Pre-flight Announcement.
• Captain’s Announcement.
• Safety Briefing.

Why do planes circle airport before landing?

Generally, planes will circle above airports for the same reasons planes sometimes need to perform go-arounds. This could be anything from weather to an incident on the runway. Sometimes weather or a plane stuck on the runway can clear out in a short enough time that circling around the airport is an acceptable delay.

When approaching to land on a runway served by a Vasi The pilot shall?

each pilot of an airplane approaching to land on a runway served by a visual approach slope indicator shall maintain an altitude at or above the glide slope until a lower altitude is necessary for landing.”

What are the requirements to be an air traffic controller?

Associate’s degreeAir traffic controller / Entry level education

What does it mean to maintain altitude in air traffic control?

The altitude or flight level instructions in an ATC clearance normally require that a pilot “ MAINTAIN ” the altitude or flight level at which the flight will operate when in controlled airspace. Altitude or flight level changes while en route should be requested prior to the time the change is desired.

Can a pilot descend to a specific altitude in the block?

Climb/descent within the block is to be made at the discretion of the pilot. However, once the pilot starts descent and verbally reports leaving an altitude in the block, the pilot may not return to that altitude without additional ATC clearance. P/CG Term – CRUISE.

How high above the ground does controlled airspace begin?

The controlled airspace over these airports will normally begin at 700 feet or 1,200 feet above ground level and can be determined from the visual aeronautical charts. Pilots are expected to use good operating practices and communicate with the control tower as described in this section. b.

What should pilots read back from ATC clearances?

Pilots of airborne aircraft should read back those parts of ATC clearances and instructions containing altitude assignments, vectors, or runway assignments as a means of mutual verification.