What is a 10-4 in police code?

What is a 10-4 in police code?

10-4 is an affirmative signal: it means “OK.” The ten-codes are credited to Illinois State Police Communications Director Charles Hopper who created them between 1937–40 for use in radio communications among cops. In the 1930s, radio technology was still relatively new and limited.

What is the code for Dead on arrival?

DOA
DOA = Dead On Arrival.

What are the codes for cops?

Police 10 Codes

Code General Purpose APCO (Association of Police Communications Officers)
10-3 Stop Transmitting Stop Transmitting
10-4 Acknowledgment (OK) Affirmative (OK)
10-5 Relay Relay To/From
10-6 Busy – Unless Urgent Busy

Why does 10-4 mean over and out?

: As for ‘Over and out,’ you would be shot out of the water if you used the phrase on marine radio. 10-4 was frequently used over the radio in the 50s police TV series Highway Patrol starring Broderick Crawford.

READ:   Do almonds grow in Sweden?

What does 10-4 mean on the radio?

Message received; OK
10-4. Message received; OK; acknowledged.

What are the 10 radio codes?

Walkie Talkie “10 Codes”

  • 10-1 = Receiving poorly.
  • 10-2 = Receiving well.
  • 10-3 = Stop transmitting.
  • 10-4 = Message received.
  • 10-5 = Relay message to ___
  • 10-6 = Busy, please stand by.
  • 10-7 = Out of service, leaving the air.
  • 10-8 = In service, subject to call.

What is a code 4 at Walmart?

Code 4 Meaning “Code 4” means everything is under control or the scene is safe. It indicates the officers are now in charge of the situation they were called to.

What does a 10 20 mean?

It’s a question that can be answered easily, actually. We took inspiration from CB Radio slang. If you hear a truck driver say “10-20” on their CB radio, it’s just another way to say “Your current location.”

What is the meaning of 10-10-10 fertilizer?

This label, known as the fertilizer grade, is a national standard. A bag of 10-10-10 fertilizer contains 10 percent nitrogen, 10 percent phosphate and 10 percent potash. Fertilizer grades are made by mixing two or more nutrient sources together to form a blend, that is why they are called “mixed fertilizers.”

READ:   Is a 75 average good?

What does 10-4 mean?

What does 10-4 mean? Roger that! 10-4 is a way of saying “message received” in radio communications. It’s also used as a way to “you got it.”

What is the origin of the expression 10-4?

The expression 10-4 further spread into popular culture when it was featured in C. W. McCall’s 1975 song “Convoy,” where he uses trucker CB radio slang like breaker one-nine (a radio channel used by truckers) and 10-4. The song went number one on the charts in the US and abroad and was even made into a movie in 1978.

What is a 1010-4 code?

10-4 is one of the so-called ten-codes, or radio signals, invented by the Association of Public-Safety Communications Officials-International (APCO).

What is a 10 4 in police code?

What is a 10 4 in police code?

10-4 is an affirmative signal: it means “OK.” The ten-codes are credited to Illinois State Police Communications Director Charles Hopper who created them between 1937–40 for use in radio communications among cops. In the 1930s, radio technology was still relatively new and limited.

What do 10 codes mean?

Ten-codes, officially known as ten signals, are brevity codes used to represent common phrases in voice communication, particularly by law enforcement and in Citizens Band (CB) radio transmissions.

What do 10 8 mean?

10-8: This means an officer or unit is in service and available for calls. An officer will check on the radio or advise that they’re ready for another call by “taking a 10-8.” Conversationally, officers may use it to describe a suspect who fled from them, saying the suspect “got 10-8.”

What are the most commonly used police 10 codes?

10-00 = Officer down,all patrols respond

  • 10-0 = Caution
  • 10-1 = Reception poor
  • 10-2 = Reception good
  • 10-3 = Stop transmitting
  • 10-4 = Message received,understood
  • 10-5 = Repay message
  • 10-6 = Change channel
  • 10-7 = Out of service
  • 10-7A = Out of service,home
  • READ:   Is a 75 average good?

    What does the police code 10-45 mean?

    Police code 10-45 means Condition of patient.

    What does ‘code 10’ mean for the police?

    Ten-codes, also known as 10-codes or ten signals, are code words used by many police officers to aid with voice communication. The codes were originally developed in 1937 to allow for brevity, clarity, and standardization of messages transmitted over radio channels. On old radio systems, channels were limited so messages needed to be short.

    What is a 10-15 police code?

    Police code 10-15 means Prisoner in custody / Message delivered. Police Code 10-12. Police Code 10-13. Police Code 10-14. Police Code 10-15m. Police Code 10-16.