Table of Contents
What is a zone in a security system?
A home security zone is defined as a specific area of the house as seen on the alarm system’s panel device. Each zone corresponds to the sensor or alarm component securing it and is identified by an assigned number so that the security monitoring company and homeowner will know which sensor has been triggered.
How do I get rid of the trouble light on my DSC alarm?
The trouble light is an indication that something is not functioning properly on your DSC security system. When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad.
How do I clear the fault on my ADT alarm?
The security system may need to be reset by entering your code into your system and hitting off twice. Remember to remove the system from Test Mode. Go to MyADT.com and click on My Alarm from the System Management option, select Stop Test to remove the system from test mode and restore operations.
What are zone types?
The number can specify the level of use, or it may indicate a certain amount of acreage or square footage for that particular property.
- Residential Zoning. Residential zones can include:
- Commercial Zoning.
- Industrial Zoning.
- Agricultural Zoning.
- Rural Zoning.
- Combination Zoning.
- Historic Zoning.
- Aesthetic Zoning.
What is special about an entry type zone?
When an Entry/Exit zone is activated, the system understands that someone new has entered or exited the premises. If no disarm occurs within this period, the system will go into alarm. A unique aspect of an Entry/Exit zone is that it can be used to put the system into Arm Away mode when Auto-Stay Arming is enabled.
What are the different alarm types?
Types of Alarm Systems for Office Buildings
- Motion Sensor Alarms.
- Fire Alarm System.
- Water Alarm.
- Door Sensor Alarms.
- Heat Alarm.
- Infrared sensors.
- Contact Sensors Guide.
- Intrusion Alarm.
What are the seven types of alarm system?
What Are the Different Types of Home Alarm Systems?
- Electric Current Alarm System.
- Wired Alarm System.
- Wireless Home Alarm System.
- Unmonitored Home Alarm System.
- Monitored Home Alarm System.
What does trouble mean on alarm system?
A trouble signal (sometimes indicated in the alarm history by the abbreviation TR) indicates a possible problem or difficulty with your security system, such as a loose wire, a poorly aligned sensor or a low battery status.
What does the yellow trouble light on my DSC keypad mean?
The yellow trouble light indicates a system problem of some sort. To find out the cause of the trouble light, press *2 on your keypad. could be a phone line issue or the system could not connect to a monitoring station or self dial attempt failed. 5 or 6 means there is an issue with a zone or sensor or related wiring.
How do I delete a zone on my ADT alarm?
How to Remove ADT Window and Door Sensors
- Select “Zones” to open a list of the active zones throughout your house.
- Choose the zone you want to bypass, select “Bypass,” and enter your user code.
- The zone you selected should now be bypassed and safe to remove without tripping the alarm.
How do I know if my ADT alarm is armed?
When you arm your system using the Away arming method, both interior zones (e.g., motion detectors) and border zones (e.g., door and window contacts) will be active and will cause an alarm to sound when opened. 1. Check that your system is ready to be armed (Ready light is ON).