What is Argoshield?

BOC Argoshield is an advanced range of shielding gases delivering superior welding performance, productivity and lowering customer operating costs. These excellent ‘first time’ results help to cut the frequency rework and post-weld treatment – a key factor in driving costs down for BOC customers.

Can you use argon CO2 mix for MIG welding?

The most commonly used Inert gas is Argon. Argon is the main shielding gas used for Tig Welding and for Mig Welding Aluminium or Mig Brazing. An Argon/Co2 mix produces superior results as the arc is softer and smoother with the resulting weld deposit slightly softer and more malleable than where pure Co2 is used.

Is argon and argon the same?

Argon is a chemical element with the symbol Ar and atomic number 18. It is in group 18 of the periodic table and is a noble gas. Argon is the third-most abundant gas in the Earth’s atmosphere, at 0.934\% (9340 ppmv)….

Argon
Atomic number (Z)	18
Group	group 18 (noble gases)
Period	period 3
Block	p-block

Can you run MIG with argon?

In summary, it is possible to stick steel together using a MIG welder with 100\% Argon shielding gas. But, you end up with a shoddy-looking, weak, brittle weld. If you need a strong, quality weld, 100\% Argon is NOT a good choice for MIG welding steel.

What is the difference between Argoshield light and Argoshield universal?

Argoshield Universal contains the same amount of oxygen as Argoshield Light but slightly less argon and more CO2. It produces smooth, flat welds with fewer weld defects and with its low spatter performance reduces the need for rework.

How much is a bottle of Argon?

125 cu/ft 100\% Argon Tank Welding Gas Cylinder CGA 580 – FULL

Was:	$364.99 Details
Price:	$340.00
You Save:	$24.99 (7\%)

Which gas is best for MIG welding?

argon
A 75/25 argon and CO2 blend is typically considered to be the best overall option for MIG welding, so that’s our top recommendation at Vern Lewis Welding Supply. A “tri-mix” of helium, argon, and CO2 is also sometimes used.

Can I use nitrogen for MIG welding?

Yes, nitrogen can be used for MIG welding. This semi-inert gas adds certain good qualities to the weld when used as a shielding gas or in other forms.

Can you use a CO2 tank for argon?

So, you can put CO2 in an argon tank, but no argon, or mix into a CO2 tank. As for volume of CO2: With a molecular weight of 44, there are around 10.3mol of CO2 in a pound.

What is Argoshield light used for?

Argoshield Light is specifically formulated for MIG welding sheet and thin sections of mild steel less than 4mm thick. The low levels of carbon dioxide and oxygen in the weld reduce the risk of burning through and leaving holes in the weld area.