Table of Contents
What is offline monitoring?
The offline monitoring is a quick summary analysis of a run, using reconstruction information (clustering, tracking, matching). The first step is therefore to perform the reconstruction (using the HarpoReconstructionWriter class).
What are condition monitoring techniques?
Complete List of Condition Monitoring Techniques
- Oil Analysis/Tribology.
- Vibration Analysis/Dynamic Monitoring.
- Motor Circuit Analysis.
- Thermography/Temperature Measurements/Infrared Thermography.
- Ultrasonic Monitoring/Acoustic Analysis/Airborne Ultrasonics.
- Radiography/Radiation Analysis/Neutron Radiography.
Which is the other name for condition monitoring?
Condition monitoring (colloquially, CM) is the process of monitoring a parameter of condition in machinery (vibration, temperature etc.), in order to identify a significant change which is indicative of a developing fault. It is a major component of predictive maintenance.
Where do you use condition monitoring?
Condition monitoring techniques are typically used on rotating equipment (gearboxes, reciprocating machines, centrifugal machines, etc.), backup or secondary systems, and other machinery such as compressors, pumps, electric motors, presses and internal combustion engines.
What are the instruments used in condition monitoring?
Measurement Technologies and Sensors for Condition Monitoring Applications
| Measurement | Sensor | Vendors |
|---|---|---|
| Motor Current | Current Shunt Current Clamp | Magnelab |
| Temperature | RTD Thermocouple | NI |
| Temperature | Infrared Camera | FLIR Systems |
| Pressure | Dynamic Pressure | Endevco PCB Kulite Kistler |
Which sensor is used in monitoring?
What is pulse rate sensor?
A pulse wave is the change in the volume of a blood vessel that occurs when the heart pumps blood, and a detector that monitors this volume change is called a pulse sensor. The reflection-type pulse sensor (Optical Sensor for Heart Rate Monitor) is explained below.
What is IoT sensor?
Sensors are everywhere. The IoT and its counterpart, the Industrial Internet of Things (IIoT), are bringing sensor usage to a new level. Broadly speaking, sensors are devices that detect and respond to changes in an environment. Inputs can come from a variety of sources such as light, temperature, motion and pressure.
Is pulse sensor analog or digital?
Pulse Sensor Pinout Connects to analog input of an Arduino. + (VCC) is the VCC pin. Connects to 3.3 or 5V. – (GND) is the Ground pin.
What is offline condition monitoring?
Offline Condition monitoring refers to as Portable analyzers either Vibration analyzers , Acoustic emissions or Oil analysis. Person would go the machine take the data on that very instant to see the machinery fault. So data should’ve to be collected on daily basis in order to see any fault developing onto the machinery.
What is the difference between condition monitoring and predictive maintenance?
In other words, Predictive Maintenance is one of the ways in which Condition Monitoring can be leveraged. The two are complementary and refer to different ways of using and acting upon sensor data. Both are reliable methods to ensure operational safety at every level, including in hazardous areas.
What is conditioncondition monitoring and why is it important?
Condition Monitoring is one of the most useful methods to provide an answer to these questions. It refers to the continuous monitoring of the equipment’s state and operating parameters, usually through dedicated sensors and monitoring tools.