What is the 8 pin connector on a motherboard for?

Can be used to connect to a six or eight pin socket on a video card to provide additional 12v power. Most commonly used to power hard drives and optical drives. These are mostly often used for fan connections in modern system, but in the past they were used for hard drives, optical drives, and many other devices.

What is 8 pin motherboard?

The 8-pin connector is literally designed as two of the 4-pin connectors put together. It is entirely possible to just plug the 4-pin connector in the 8-pin slot. It won’t damage anything, but the motherboard will detect the difference and either not start up at all, or run in a VERY restricted mode.

What is IC on motherboard?

As you have noticed, the motherboard contains a number of black boxes known as Integrated Circuits or ICs. The integration of large numbers of tiny transistors into a small chip results in circuits that are orders of magnitude smaller, cheaper, and faster than those constructed of discrete electronic components.

Is 8 pin enough for CPU?

The 8 pin is more than enough for running the system. You’re totally fine without it. If you’re upgrading to a RTX 3070 or 3080 and a Ryzen 5600X your 650 Watts should be enough since it’s a good model.

Do you need ATX12V?

This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it. “

What is 8 pin EPS?

8-pin EPS female connector is the connector at the end of the 8 pin (or sometimes 4+4 pin) CPU power supply cable which connects to the motherboard.

Are all 8 pin connectors the same?

Generally, all 8-pin connectors FROM THE SAME PSU will be the same and can be put anywhere.

Can you replace IC?

ICA | Change of Particulars for/Damage of Identity Card. Identity Card (IC) holders may apply for a replacement if they wish to change their particulars/ photographs. Those whose identity cards are damaged or defaced are required to apply for a replacement within 14 days from the date of damage/ defacement.

What is IC function?

An integrated circuit, or IC, is small chip that can function as an amplifier, oscillator, timer, microprocessor, or even computer memory. These extremely small electronics can perform calculations and store data using either digital or analog technology. …

Is eatx12v_2 needed?

It’s right below the last PCIe lane. With 2 GPUs, there is no need to populate it. No worries.

Do I need both 8 pin cpu power connector?

If you have more than one 8-pin ATX-12V cable coming from your power supply, you can use either of them to connect to the motherboard. (Some motherboards require two such cables, so both must be used.) You cannot, however, use any 8-pin PCI-E cable to power the motherboard.

What is EPS 12v?

EPS12V is a special, non-ATX standard adopted by the Server System Infrastructure (SSI) group to provide a more powerful and stable environment for critical server-based systems and applications. EPS12V equipment is not compatible with standard ATX or ATX12V PCs found in homes and offices.

What is motherboard connectors?

Motherboard connectors pinouts A Motherboard (sometimes alternatively known as the mainboard, system board, planar board or logic board, or colloquially, a mobo) is the main printed circuit board (PCB) found in computers and other expandable systems. It holds and allows communication between many of the crucial electronic components.

Where is the PCI-e port on the motherboard?

I strongly suspect it also to also be valid for current AMD systems (as of 2018), and i have no guesses as to whether it’s still valid for Intel systems. It’s usually located a the bottom of the board, next to the CR2032 battery, PCI Express slots or under the chipset.

What are the parts of a computer motherboard?

A computer motherboard would generally have a CPU, maybe a FPU, a bios chip, cache memory, and a few bus controllers. Narrowing down the different functions of each chip on the board can help you guess your chips function.

How many connections does a motherboard have?

A typical motherboard will have a different number of connections depending on its standard and form factor . A standard, modern ATX motherboard will typically have two or three PCI-Express 16x connection for a graphics card, one or two legacy PCI slots for various expansion cards, and one or two PCI-E 1x (which has superseded PCI ).