What type of wood should I use to make a longboard?

Maple usually ranges from 5 ply up to 10 ply (refers to layers of wood that are used in the construction process). It is the common wood used today in longboard skateboards. Longboards that are built with all maple get fairly heavy, which is why some other, lighter woods are mixed with the plys by some manufacturers.

Can I use plywood to make a longboard?

To create the blank for the longboard deck, you will need to glue 4 plies of 1/8″ plywood together to create 1/2″ thick deck. It’s better to use too much glue than to use too little, because you would rather have a durable and reliable deck than have a fragile one that will break after only a few months of use.

What kind of wood is used for skateboards?

hard maple wood
1: Skateboards are made from hard maple wood that, generally, comes from the Great Lakes region of North America.

How many ply should a longboard be?

Features of longboard decks. Longboard decks vary in size but most are between 7″-10″ wide, and are made of seven-ply wood, bamboo, resin, carbon fiber, or plastic. Deciding which skateboard deck is best for you depends on what you will be skating and, of course, your personal brand preference.

How thick should longboard wood be?

Most decks will be around 1/2″ thick, differentiating by design and material. Carving boards can be made with different materials including maple and bamboo.

How thick is the wood on a longboard?

Longboard decks are typically made from plywood: anywhere from two to eleven layers, each of usually 2 millimeters (0.079 in) in thickness, composed of birch, bamboo, maple, koa, or oak wood.

Can you make a longboard out of pine?

The Materials. The are number of different types of wood that can be used for a longboard. As it turns out most of the specialty woods from Lowes/Home depots are just pine wood with a thin sheet of veneer on the outside for appearances. After some experimentation we found the best thickness for plies was 1/8” or lower.

What is a longboard made of?

The vast majority of longboards are made from forms of plywood. Wikipedia says Longboard decks are typically made from plywood anywhere from two to eleven layers of usually 2 millimetres (0.079 in) in thickness, composed of birch, bamboo, maple, koa, or oak wood .

What is the best wood for making boards?

The Ministry of Wood recommends that the Canadian Maple is best suited for making boards. This material is the most widespread for manufacturing and long-term use. Other good materials to create are birch plywood or bamboo. However, each of them has its characteristics and features.

What type of wood is used for skateboards?

What Type of Wood Is Used for Skateboards? 1 Canadian Maple. According to research by East Tennessee State University, Canadian Maple is the most adapted wood for… 2 Bamboo. 3 Plywood. Of course, you should pay attention to the quality of the production. Each factory has its production… More

How to tell if a longboard is good quality?

If even the smallest stratification is noticeable at first glance, it is an indicator of poor quality. It is the cause of dryness of wood for a longboard or other skate, which is less elastic and will serve you less time. Pay attention to the roundness, curvature of the board.