Which type of foundation is used for pump?

In general, a pump should be mounted on a strong baseplate supported by a strong concrete foundation. It is also necessary to properly connect the pump to the system by accurately aligning it to the piping system, as well as the driving motor.

Why do you grout pump bases?

In addition to strength and stiffness, grouting locks the pump base to the foundation, making it heavier. This helps maintain the shaft-to-shaft alignment, reducing wear on the moving parts. Proper alignment minimizes wear on parts, which helps reduce the repair cost down the road for the end user.

What is the main purpose of the pump?

A pump produces liquid movement or flow: it does not generate pressure. It produces the flow necessary for the development of pressure which is a function of resistance to fluid flow in the system.

What is a pump base?

The purpose of any baseplate is to provide level, coplanar surfaces to mount the pump and driver, allowing for a proper and precise alignment between the two. More importantly, the base provides a path for the transmission of vibrations, nozzle loads and piping forces to the foundation and into the ground.

What is pump plinth?

Plinth frames are used to create a base for pumps and other similar machines / appliances. Once assembled the plinth frame is placed into position, secured to the ground and filled with concrete. Corners come sealed to prevent leaking whilst filling with concrete.

Why do we grout base plate on concrete foundations?

Concrete grout is used in most column base connections to facilitate the construction process and to ensure that full contact is achieved between the steel plate and the concrete pedestal.

Do pumps add pressure or flow?

A pump does not create pressure, it only creates flow. Pressure is a measurement of the resistance to flow. In Newtonian (true) fluids (non-viscous liquids, such as water or gasoline), the term head is the measurement of the kinetic energy that a centrifugal pump creates.

What is pump base plate?

In the context of the installation of centrifugal pumps, the baseplate serves as a joint base for the pump and the associated drive (pump foundation). Both components are attached to the baseplate and, once aligned, should be protected against the effects of piping forces and moments.

What is a base plate on a pump?

Baseplate. In the context of the installation of centrifugal pumps, the baseplate serves as a joint base for the pump and the associated drive ( pump foundation ). Both components are attached to the baseplate and, once aligned, should be protected against the effects of piping forces and moments.

What is a flex frame pool pump?

Flex ( Thru Bolt Design with Threaded Shaft) – An offshoot of the Y-frame motors, the Flex frame is used on above ground pool and spa pumps. The Flex-frame motors are usually labeled as 48Y, but will have the distinct pedestal at its base.

What is the purpose of a base on a sprinkler system?

More importantly, the base provides a path for the transmission of vibrations, nozzle loads and piping forces to the foundation and into the ground. If the base is not designed or installed properly, the investment in the alignment process will be lost in the first moments the pump operates.

What is a set pump?

In general, process pump manufacturers are asked to provide pumps as a “set” or assembled package comprising pump, driver and base plate (see figure 1).